The chiller consists of four main parts: compressor, evaporator, condenser, expansion valve, so as to achieve the cooling and heating effect of the chiller. The Air-cooled industrial water chiller is mainly used to cool the heating components of the equipment to ensure that machine operate with a constant temperature. That it can well worked for process gas compressor's cooling process with low gas temperature as clients required for.
As an industrial water chiller, this air cooled screw chiller has the following FEATURES:
1. Refrigeration Cooling capacity: 180kw~1520kw
2. Cooling conditions: Chilled water inlet temperature is 12˚C, outlet temperature is 7˚C. Ambient temperature is 35˚C.
3. Input power: normal in stock 380V/50Hz.3ph, Allowable fluctuate voltage: ± 10%, allowable voltage difference in phase: ± 2%. Special customize voltage, please inquiry contact us to unit quote.
4. Measuring noise spot: 2m ahead and 1.5m high in front of chiller with average measurement on four dimensions
5. Semi-closed 5: 6 asymmetric twin-screw compressor from world-renowned brand, trouble-free operation over 100000hours.
6. Eight stages volume control or 0%-100% automatic regulation.
7. Fluoride-resistant high-performance motor from French.
8. Use PLC microcomputer control from Germany Siemens LCD touch screen, in English operation manual and human-machine interface.
9. Wide range of variable chilled water temperature to meet the industrial requirements throughout whole year.
10. Friendly choose to use environmentally R407C or R134A refrigerant.
11. Free shut-down triangle stars starter
12. Dual refrigeration circuits to each other back-up.
13. Can special customize the professional low temperature Water Chiller, reduce the temperature to -180˚C degree celsius.
| Specifications |
|Refrigeration capacity ||KW||9|
|Cooling water consumption ||m³/h||1.6|
|Compressor||type||Fully enclosed scroll type|
|start mode||Sequential direct start|
|Control method||Temperature Sensitive External Pressure-equalizing Expansion Valve|
|Evaporator||type||Stainless steel water tank coil/shell-and-tube type|
|Condenser||type||High Efficiency Finned Copper Tube with Internal Thread|
|Cooling fan||type||Low Noise Axial Flow Fan (Low Noise Outer Rotor Fan)|
|*Built-in tank volum*||L||50|
|*Built-in pump power*||KW||0.37|
|Protect device||High and low voltage switch, anti-freezing protection, thrombolytic/safety valve, overload protection device, coil overheat protector, temperature automatic protection switch, etc.|
1. Measuring conditions of above specifications and parameters: inlet temperature of frozen water 12℃, outlet temperature 7℃, outdoor ambient temperature DB35 C/WB24℃;2. Scope of work: The temperature range of circulating water is from 5 to 35℃, and the temperature difference between inlet and outlet water is from 3 to 8℃. Use at Condensation Temperature not higher than 35℃.
3. The specifications are subject to change without notice. If there are special requirements, please specify the specifications before ordering.
4. The main spare part of equipment Configurationt: Japan Panasonic compressor, USA LKE refrigeration accessories, France Schneider electronic controller, computer control panel; which equipped with high and low voltage switch. For the motor overload protection, lack of reverse phase protection, safety valve and other protective devices; stainless steel water tank coil evaporator and fin condenser .
5. Can special customize the professional low temperature Water Chiller, reduce the temperature to -180˚C degree celsius.
Welcome your visit our factory, for OEM and ODM cooperation negotiation.
|Air cooling type Water Chiller Main Configured Material List|
|No.||Spare part||Brand||Place of Origin|
|2||Electrical components||Schneider ||France|
|3||Stainless steel coil evaporator ||Keepwin||Hebei|
|5||Oil pressure gauge (high pressure)||FUCO ||Taiwan|
|6||Oil pressure gauge (low pressure)||FUCO ||Taiwan|
|7||expansion valve||ALCO EMERSON||USA|
|8||Chilled water circulating pump (built-in)||NANFANG ||Hangzhou|
|9||Drying filter||ALCO EMERSON||USA|
|10||Computer Control System||Keepwin||Hebei|
Air-cooled (heat pump) chiller product introduction
The Keepwin air-cooled chiller series is the essence of domestic and foreign products. It is manufactured with modern and advanced technology, with high quality and beautiful appearance. At present, the product cooling capacity is from 16000Kcal/hr to 240,000Kcal/hr (8HP-120HP), and the calorific value is 92000Kcal/hr to 288000Kcal/hr (8HP-120HP), which can be widely used in shopping malls, hotels, banks, hotels, theaters and industrial fields. .
Selected imported brand-name hermetic reciprocating / scroll and semi-closed screw / reciprocating compressor. Good performance and low noise. According to customer needs and cold tonnage size, single or multi-machine combination. The compressor can be alternately operated according to the load, and the operating hours of each compressor are balanced, which greatly extends the service life of the chiller.
The condenser is equipped with high-efficiency tapered fins and internally threaded copper tubes for high heat exchange efficiency and good stability.
The evaporator adopts internal and external threaded reinforced tubes. The inner surface of the copper tube is threaded, and the outer surface of the copper tube is smooth, and the cooling effect is good. The outside of the evaporator barrel is insulated by a 25mm thick PE insulation board, which does not condense and has less loss of cooling capacity.
The protection system devices include: temperature control switch, high and low pressure switch, overload protector, compressor overheat protector, compressor frequent start protector and abnormal indicator light.
Computer control system
Configured a high-intelligence PLC and PC-level computer control system for remote monitoring and control. The operation is simple, the host is connected to the power source, the failure rate is low, the safety factor is high, and the installation is simple. System control is instantly adjustable, intuitive and reliable.
The box plate of the unit is precision machined by CNC punching machine. It adopts electrostatic powder baking paint, which is luxurious and beautiful in appearance, and has good sound insulation effect.