Selection of lubricating oil for compressorWhen the mechanical equipment is constantly improved, the lubricating oil as its "blood" must also adapt to the development pace. At this stage, mi
2020/06/23 keepwin
1,Installation of compressor unit The compressor unit shall be installed according to the factory requirements. Allowable working environment temperature of compressor: - 5 ℃ ~ + 40 ℃ The com
2020/06/23 keepwin
The crank mechanism supported in the crankcase consists of a double crank and six connecting rods. The sturdy crankcase is made of cast iron and its bottom serves as an oil pan. Another special oil storage tank, as a continuation of the oil pan, draws in the lubricating oil required by the crank mechanism from here. An oil distributor is installed on the side of the crankcase, and the oil from the oil distributor flows through the oil filter. The oil filler pipe is installed on the upper part of the crankcase.
2020/06/23 keepwin
The unit features low energy consumption, low noise, small vibration, high reliability, simple operation and low maintenance cost. The whole machine is composed of compressor, diesel engine, gearbox, closed water system, pipeline system, control instrument system, electrical equipment and auxiliary equipment.
2020/06/23 keepwin
The main parts of keepwin diaphragm compressor are organism, cylinder, piston assembly, diaphragm assembly, crankshaft, connecting rod, crosshead, bearing, packing, air valve, etc.
2020/06/23 keepwin
Common faults and troubleshooting of diaphragm compressor,keepwin diaphragm compressor manual。
2020/06/23 keepwin
Daily operation of compressorPreparation and start-up: routine inspection shall be carried out before start-up, and the oil quantity in the fuselage shall be checked. 1 Initial starting preparation a
2020/06/23 keepwin
1. Safety precautions1.1 The equipment operator shall have operation qualification, and the compressor unit shall be operated by fixed personnel.1.2 Compressed media and oil with pressure are dangerou
2020/06/23 keepwin