검색
이 검색창을 닫습니다.

단일 블로그

왕복동 컴프레서를 사용할 때 피해야 할 3가지 실수

A 왕복동 컴프레서 is one of the most trusted solutions for compressing air and gas in a wide range of industries. However, even the most robust compressors can underperform or fail prematurely if used improperly.

To help you extend the life of your equipment and increase 컴프레서 효율성, we’ve listed 3 critical mistakes you should avoid—based on KEEPWIN’s real-world experience with industrial gas compression systems.


❌ Mistake 1: Ignoring Proper Lubrication and Oil Quality

One of the most common errors is neglecting oil quality or levels, especially in lubricated piston compressors.

Poor lubrication can lead to:

  • Increased wear on pistons and rings

  • High discharge temperatures

  • Contaminated end-product (in gas applications)

  • Shortened bearing and crankshaft life

KEEPWIN provides both lubricated and 오일 프리 컴프레서 options. In applications like medical oxygen or high-purity hydrogen, we recommend our GL series diaphragm or dry-running piston compressors.

Always follow your maintenance schedule and use manufacturer-approved oils with correct viscosity and additives.


❌ Mistake 2: Incorrect Pressure Matching and Overloading

Another common mistake is using a reciprocating compressor outside its pressure design range. Compressing beyond rated discharge pressure stresses the system and increases the risk of:

  • 과열

  • Valve failure

  • Gasket leakage

  • Excessive vibration

📌 For example, a customer in Central Asia requested a 300 bar gas booster for nitrogen. Initial attempts used a 200 bar unit, leading to constant safety valve blowouts. After working with KEEPWIN, they upgraded to a 3-stage VF-3.0/30-300 compressor, optimized for pressure staging and thermal balance.

Always match your 압축기 유형 to the real operating conditions—don’t assume “more pressure is better.”


❌ Mistake 3: Poor Preventive Maintenance and Inspection

Even durable compressors require routine maintenance. Skipping inspections or delaying servicing can cause:

  • Worn-out piston rings

  • Loose valve plates

  • Cooling inefficiencies

  • Seal or diaphragm rupture (in oil-free systems)

🛠 KEEPWIN’s compressors include optional sensors for temperature, pressure, and vibration monitoring. Our PLC-based systems issue preventive alerts to avoid unplanned shutdowns.

A simple monthly inspection of belts, filters, valve torque, and lubrication systems can prevent costly failures down the line.


✅ Bonus Tips for Operating a Reciprocating Compressor Efficiently

  • Use aftercoolers or intercoolers to reduce discharge temperatures

  • Install pulsation dampeners for smoother operation

  • Keep inlet filters clean to protect cylinders and valves

  • Consider upgrading to a two-stage or three-stage design for higher pressure efficiency


A 왕복동 컴프레서 is powerful, versatile, and long-lasting—but only if used and maintained correctly. By avoiding these 3 common mistakes, you can greatly enhance 컴프레서 효율성, reduce downtime, and extend the lifespan of your system.

에서 킵윈 테크놀로지 허베이 주식회사, we help clients in oil & gas, hydrogen, nitrogen, and industrial gases choose and operate the right compressor with full technical support.


📩 Need help diagnosing a compressor issue or choosing the right model?
🌐 Visit www.keep-win.com or email us at keepwin@keep-win.com

John Hannah 사진

존 한나

통찰력 있고 명료한 글을 보내주셔서 감사합니다. 귀하의 관점은 대화에 큰 도움이 되었으며, 몇 가지 주요 실행 포인트를 얻을 수 있었습니다. 지식을 공유해 주셔서 감사드리며 앞으로의 포스팅도 기대하겠습니다.

답글 남기기

이메일 주소는 공개되지 않습니다. 필수 필드는 *로 표시됩니다

이 사이트는 Akismet을 사용하여 스팸을 줄입니다. 댓글 데이터가 어떻게 처리되는지 알아보세요.

ko_KR한국어

압축기 솔루션 받기

전문 엔지니어가 고객의 요구에 맞는 솔루션을 설계할 수 있도록 준비해 드립니다.

*저희는 사용자의 개인정보를 존중합니다. 제출하시면 Keepwin의 전담 전문가가 최대한 빠른 시일 내에 연락을 드릴 것입니다.